Factory-direct structural extrusions, precision frame joinery, and architectural finishes tailored for NYC B2B contractors, developers, and millwork specifiers.
High-Rise Grade
Engineered 6063-T6 extruded frame with perimeter elastomeric sealing for moisture-proof and air-tight kitchen module framing.
Get Catalog
Joinery Profile
Structural L-angle corner joinery profiles for frameless cabinet door edges and heavy-load kitchen unit reinforcement.
Get Catalog
Sublimated Finish
Real-touch timber aesthetics on 6061-T6 aluminum extrusions, delivering zero rot, non-combustibility, and thermal stability.
Get Catalog
Modular Framing
Precision-milled corner profiles providing seamless structural alignment for high-density multi-family modular kitchen layouts.
Get Catalog
Qualicoat Class 2
Electrostatic polyester powder-coated aluminium trims (60–80 µm) engineered for scratch-resistant kitchen perimeter edges.
Get Catalog
Anodized 25 µm
Electrochemical oxide surface layer (20–25 microns) offering superior corrosion proofing for heavy-use kitchen environments.
Get Catalog
Coastal / Outdoor
Salt-spray resistant aluminium structural framing optimized for rooftop terraces, Hamptons estates, and outdoor NYC dining setups.
Get Catalog
Structural Hardware
Precision extruded aluminum bracket hardware designed for rapid dry-hanging installation in commercial NYC building retrofits.
Get CatalogThe New York metropolitan area represents one of the most demanding built environments in North America. Commercial real estate developers, architectural specifiers, general contractors, and interior designers across Manhattan, Brooklyn, Queens, and Long Island are increasingly abandoning traditional wood, MDF, and particleboard millwork. In high-density residential towers, historic brownstones, and high-exposure coastal developments, traditional timber-based cabinetry suffers from accelerated degradation caused by humidity fluctuations, pest infestation, VOC off-gassing, and—most crucially—strict fire safety constraints enforced by the New York City Department of Buildings (DOB).
As a premier integrated OEM/ODM OEM extrusion, anodizing, and powder-coating manufacturing facility, our enterprise produces precision-engineered aluminium kitchen cabinetry systems explicitly targeted to fulfill New York’s rigorous structural, aesthetic, and environmental building standards. By unifying raw billet extrusion (primarily 6063-T5/T6 and 6061-T6 alloys), CNC machining, zero-chemical conversion pre-treatment, and high-durability surface finishing under one industrial roof, we provide turnkey cabinetry solutions that deliver unparalleled information gain and structural resilience for B2B procurement teams.
Aluminum is natively non-combustible (ASTM E84 Class A rated). Meets stringent NYC high-rise building codes without toxic flame-retardant coatings.
Eliminating formaldehyde binders found in MDF. Inert metallic profiles guarantee pristine indoor air quality for modern urban dwellers.
Zero warping, swelling, or linear thermal distortion under extreme NYC seasonal heating and cooling transitions.
Modern architectural layouts across the five boroughs of New York demand versatile spatial solutions. Our factory customizes aluminum kitchen cabinetry configurations to solve very specific regional urban friction points:
Space optimization is paramount in modern Manhattan high-rise towers. Heavy, bulky wood carcass construction restricts usable interior volumes. Our micro-thin yet hyper-structural 6063-T6 aluminum profile wall extrusions (1.2mm to 2.0mm wall thickness options) increase interior shelf volume by up to 12% compared to standard 3/4-inch plywood shells. Furthermore, lightweight modular units reduce dead-load calculations on elevated slab floors, lowering structural engineering overhead.
Retrofitting sub-grade basements and century-old brownstones in Brooklyn often introduces sub-floor moisture, masonry dampness, and rodent movement pathways. Wooden cabinets act as organic food sources for mold spores and pests. Powder-coated extruded aluminium carcasses are completely impervious to moisture absorption, preventing fungal proliferation, cabinet swelling, and termite damage permanently.
Extending interior living spaces to exterior rooftop patios, oceanfront deck kitchens, and Hamptons estates requires metalwork capable of withstanding aggressive salt-spray environments (ASTM B117 tested). Our marine-grade anodized profiles (20–25 µm film thickness) and architectural-grade Qualicoat Class 2 powder coatings eliminate oxidation, blistering, and UV fading caused by direct coastal exposure.
To assist architectural specification teams during project submittals, the following matrix contrasts our factory’s structural aluminium cabinetry systems against conventional architectural millwork materials under standard NYC environmental stress test conditions:
| Performance Standard / Test Parameter | Pak Alumex Extruded Aluminium | Architectural Plywood (Marine Grade) | Standard MDF / Particleboard |
|---|---|---|---|
| Fire Safety (ASTM E84 Surface Burning) | Class A / Non-Combustible (Zero Flame Spread) | Class C (Requires Chemical Intumescent) | Class C (High Smoke Generation) |
| Formaldehyde Off-Gassing (Indoor Air Quality) | 0.00 ppm (Totally Inert & VOC Free) | 0.05 - 0.10 ppm (Phenolic Resin Off-gassing) | > 0.12 ppm (Urea-Formaldehyde Off-gassing) |
| Water Absorption Rate (24-Hour Submersion) | 0.00% (Absolute Zero Moisture Retention) | 4.5% - 8.0% (Thickness Swelling Risk) | 12.0% - 25.0% (Delamination & Structural Failure) |
| Pest & Mold Proliferation Resistance | 100% Resistant (Inorganic Substrate) | Vulnerable to Mold Spores & Wood Borers | Highly Vulnerable to Fungal Rot |
| Recyclability & Circular Lifecycle | 100% Infinitely Recyclable without Quality Loss | Downcycled / Incinerated | Landfill Bound (Non-Recyclable Resin Matrix) |
| Expected Architectural Service Life | 30+ Years (Zero Structural Maintenance) | 10-15 Years (Requires Frequent Refinishing) | 5-7 Years (High Replacement Frequency) |
The New York commercial and residential development sector is undergoing a massive structural shift driven by three primary catalysts:
Selecting an international manufacturing partner for major NYC multi-family or commercial hospitality projects requires uncompromised supply chain transparency and engineering control. Operating our own extrusion presses, chemical anodizing tanks, and vertical powder-coating lines allows us to maintain strict E-E-A-T (Experience, Expertise, Authoritativeness, and Trustworthiness) standards at every stage of production:
Our in-house tool and die shop converts DWG/DXF drawings into physical extrusions within 10 to 14 days, providing rapid prototype sampling for NYC project submittals.
Equipped with computerized spectrophotometers, we guarantee ΔE < 0.5 color consistency across thousands of profiles, ensuring uniform shades across multi-story developments.
Consignments are packed with protective interleaving film, heavy-duty edge guards, and heat-treated export wooden crates. Direct containerized shipping routes land directly at the Port of New York and New Jersey for smooth regional distribution.
Technical answers addressing local New York building regulations, freight logistics, custom fabrication, and installation support.
Our 6063-T5 and 6061-T6 aluminum cabinetry profiles are inherently non-combustible and satisfy ASTM E84 Class A flame spread and smoke development requirements. This eliminates the necessity for complex fire-retardant chemical sub-coatings required for wood millwork in NYC commercial and high-rise residential buildings.
Yes. Because we control the extrusion die creation and automated CNC cutting lines, we routinely manufacture bespoke profile dimensions, modular fillers, and custom carcass depths designed to fit narrow, irregular pre-war NYC structural openings without requiring expensive site modifications.
All extrusions and assembled cabinet panels are wrapped with low-tack protective PE film, separated by foam interleaving, and secured in IPPC ISPM-15 compliant fumigated wooden crates or steel-reinforced pallets. Every container shipment includes desiccant packs to control humidity during transit.
No. Our aluminum profile carcasses are pre-drilled with standardized 32mm system hole patterns. They are engineered to seamlessly integrate with standard European architectural hardware brands such as Blum, Salice, and Hettich. Local NYC carpentry and millwork unions can install our systems using standard drywall and masonry anchors.
For coastal applications, we recommend either our 20–25 micron architectural anodized finish (Class 1 Anodize) or Qualicoat Class 2 hyper-durable powder coating over a chromate-free conversion layer, delivering superior resistance against salt fog and atmospheric oxidation.
Standard die production and sample approval take 10 to 14 days. Bulk extrusion, CNC machining, finishing, and packing take approximately 20 to 25 days. Direct ocean transit to the Port of New York & New Jersey typically ranges from 28 to 35 days, allowing reliable project schedule planning.
Partner directly with a world-class extrusion and finishing factory. Contact our engineering team today to receive profile CAD drawings, technical finish samples, and factory-direct project estimates.
Get Catalog
